Copper Nickel Sheet and Plate 

Copper Nickel Sheets & Plates 

Copper Nickel Coils

ASTM B171, B122 / ASME SB171, SB122 Copper Alloy Sheets & Plates Manufacturers, Cu-Ni 90/10 Sheet, Cu-Ni 70/30 Plate Suppliers in Mumbai, India.

manufacturer & stockist of Copper Nickel Sheets and Plates, which naturally form a thin protective surface layer over the first several weeks of exposure to seawater and this provides its ongoing resistance. In addition, Copper Nickel Sheets have a high inherent biofouling resistance to attachment by macrofoulers living in the seawater. As nickel and copper alloy by means of each other effortlessly and have unpretentious structures, Copper Nickel Plates are readily fabricated and ductile, where hardness and strength for each separate alloy is amplified by cold working and not toughened by heat treatment. Cu-Ni Sheets are weldable by the majority of techniques, although autogenously (welding without weld consumables) or oxyacetylene methods are not recommended. Cu-Ni Plates have also been used as splash zone cladding on offshore structures and protective cladding on boat hulls, as well as for solid hulls themselves. 

B122 Copper Nickel Alloy Sheets, Cupro Nickel  Sheet, Copper Sheets, B171 Copper Alloy Sheets, Cu-Ni 90/10 Sheet, Cu-Ni 70/30 Sheet, Copper Nickel Plain Sheet Dealers, Copper Nickel Cold Rolled Sheet, Copper Nickel Shim Sheet Stockists, Copper Nickel Perforated Sheet, Copper Nickel Polished Sheet, UNS C70600 / C71500 Sheets, Copper DIN 2.0872 / 2.0882 Sheet, Copper Nickel Discs, Copper Nickel Rolls Manufactures and Suppliers.

Cupronickel Sheets are weld consumables and are normally preferred for other alloys, where no after-welding heat treatment is required.To use this property to its full potential, Cupronickel Plates needs to be free of the effects of, or insulated from, any form of cathodic protection. However, Copper Nickel Coils can show high corrosion rates in polluted or stagnant seawater when sulfides or ammonia are present.It is important to avoid exposure to such conditions in Cu-Ni Coils, particularly during commissioning and refit while the surface films are maturing. Meanwhile, ferrous sulfate dosing to sea water systems can provide improved resistance in Cupronickel Coils.

B171, B122 Copper Alloy Plates, Cu-Ni 90/10 Plate, Cu-Ni 70/30 Plate, UNS C70600 / C71500 Plates, Copper Nickel Plates, Cupro Nickel  Plate, Copper Plates, Copper DIN 2.0872 / 2.0882 Plate, Copper Nickel Hot Rolled Plate, Copper Nickel Chequered Plate, Copper Nickel Coils, Copper Nickel Foils, Copper Nickel Strip, Copper Nickel Rings, Copper Nickel Blank, Copper Nickel Wire, Copper Nickel Channel, Copper Nickel Angle Exporters.

                                                                                                                                                                                                                                                                                                                        

Specifications	ASTM B171, B122 / ASME SB171, SB122
Standards	ASTM, ASME and API
Size	1 mm to 100 mm
Finishing	Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
Form	Coils, Foils, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) & Angle, Channel, Tray, Roll Etc.
Hardness	Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Grade	UNS NO. C92200 & UNS NO. C83600, UNS NO. C70600 ( CU -NI- 90/10), C71500 ( CU -NI- 70/30), UNS NO C10100, C10200, C10300, C10800, C12000, C12200.

                       

Copper Nickel Equivalent Grade

STANDARD	WERKSTOFF NR.	UNS
Copper Nickel 90/10	2.0872	C70600
Copper Nickel 70/30	2.0882	C71500

Copper Nickel Composition

Grade	Cu	Pb	Mn	Fe	Zn	Ni
Cupro Nickel 90/10	88.6 min	.05 max	1.0 max	1.8 max	1 max	9-11 max
Cupro Nickel 70/30	65.0 min	.05 max	1 max	0.4-1.0	1 max	29-33

Copper Nickel Alloy Properties

Grade	Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
Cu-Ni 90/10	0.323 lb/in3 at 68 F	2260 F	50000 psi	20000 psi	30 %
Cu-Ni 70/30	0.323 lb/in3 at 68 F	2260 F	50000 psi	20000 psi	30 %

Other Types of Copper Nickel Sheets, Plates and Coils

• ASTM B171 Copper Nickel Sheet 
• ASME SB171 Copper Nickel Plate
• UNS C70600 / 2.0872 Sheet and Plate  
• UNS C71500 / 2.0882 Sheet and Plate  
• Copper Nickel Alloy Perforated Sheets
• Copper Nickel Perforated Coils
• Copper Nickel Chequered Plates
• Cupro Nickel Hot Rolled Plates
• Copper Nickel Cold Rolled Sheet
• Cupro Nickel 90/10 Circles
• Copper Nickel Rings
• Copper Nickel Flats
• Cupro Nickel Coils 
• Cu-Ni 70/30 Angles 
• Copper Nickel Channels 
• Copper Nickel Polished Sheet 

Our City-wise Supply :

Hyderabad, Kuala Lumpur, La Victoria, Haryana, Al Jubail, Bangkok, Melbourne, Caracas, Visakhapatnam, Muscat, Ankara, Pimpri-Chinchwad, Kanpur, Jakarta, Kolkata, Chiyoda, Lagos, Brisbane, Jaipur, Granada, Edmonton, Rio de Janeiro, Hong Kong, Nagpur, Jamshedpur, Perth, Houston, Secunderabad, Busan, Sydney, Bengaluru, Abu Dhabi, Thiruvananthapuram, Sharjah, Nashik, Cairo, Mexico City, Riyadh, Port-of-Spain, Milan, Singapore, Toronto, Noida, Seoul, Howrah, Navi Mumbai, Karachi, Lahore, Tehran, Los Angeles, Dallas, Gurgaon, New Delhi, Vung Tau, Ranchi, Ahvaz, Thane, Ahmedabad, Chennai, Faridabad, Colombo, Kuwait City, Rajkot, Coimbatore, Jeddah, Surat, Gimhae-si, Chandigarh, Ernakulam, Al Khobar, Atyrau, Ho Chi Minh City, Geoje-si, Manama, Moscow, Dubai, Aberdeen, New York, Madrid, Dammam, Hanoi, Petaling Jaya, Ludhiana, Doha, Indore, Pune, Algiers, Vadodara, Baroda, Ulsan, Mumbai, Bhopal, Bogota, Montreal.

Our International Supply chain :

Sri Lanka, Japan, China, Pakistan, Afghanistan, Macau, Russia, Jordan, France, Oman, Belarus, Nepal, Mongolia, Ghana, Italy, Poland, Romania, Mexico, Estonia, Serbia, Poland, Egypt, Austria, Norway, Hungary, Netherlands, Croatia, Ecuador, Israel, Spain, Bangladesh, Ukraine, United States, Chile, Canada, Kazakhstan, Gambia, Turkey, Slovakia, Nigeria, Mexico, Zimbabwe, Azerbaijan, Colombia, Iran, Malaysia, Iraq, Singapore, Kenya, New Zealand, Gabon, Bolivia, Nigeria, Costa Rica, Portugal, Finland, Venezuela, Bhutan, Lebanon, Lithuania, Kuwait, Indonesia, Argentina, Algeria, South Korea, Ireland, Hong Kong, Puerto Rico, Australia, Thailand, Chile, Taiwan, Saudi Arabia, Bulgaria, Philippines, Greece, Tibet, Germany, Iran, Brazil, Belgium, Czech Republic, Qatar, Denmark, Yemen, South Africa, Peru, Sweden, India, Angola, Switzerland, Vietnam, Morocco, Trinidad & Tobago,Tunisia, Namibia, United Kingdom, United Arab Emirates, Bahrain, Libya.

Sheet, Plate & Coil